Thanks for responding. Yes I have a photograph but not confident of how to send it but will attempt. The clip is of the order of 16mm long.bulbrook wrote:Good afternoon, do you happen to have a photo of the spring you can upload, this way we can identify it.
Photo image reference is :-[img-20190308-161606-BURST001]
Please confirm if you can view from this.
Thanks , Puzzled
[The extension jpg has been deactivated and can no longer be displayed.]
bulbrook wrote:Hi, yes I can see the photo. That spring is located on the clutch unit, it acts as a belt guard. Not all clutches where fitted with them. So you can either leave it off but keep safe so if you strip the machine again you can refit it. Or strip the machine down again now to refit. If it was me I would not worry about it for the time being
Thanks for your response. Thats a relief to learn i can use the cleaner safely until i strip it down again. I will retain as you recomend. Is there a diagram available showing where this fits on the clutch unit i.e.an explodedf view?
Thanks; Picture showing location of clip just what I needed.bulbrook wrote:This shows where the clip is located. It can only be fitted one way.
I think we can now put this topic to bed. Thanks again for your assistance in solving my query.
No Longer "Puzzled"